Application Advantages
・ Eco-friendly, 100% solid contents, solvent-free composition
・ Excellent self-leveling properties
・ Can be applied on fresh, old concrete surface
・ Excellent abrasion, compression and impact resistances
・ Excellent scratch resistance
・ Resistance to chemicals, oil and water
・ Creates a joint-less, dustproof, easy to clean surface
・ Forms anti-stain and smooth/mirror-like finish
・ Custom colors can be choice available
Application Procedure
   While applying Kingcoat SLFT-400SF coat, surface preparation is the most important part. Remove all the loose materials to expose the base surface. Wash the surface with plenty of water. A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water. Let the surface dry to saturated surface dry (SSD) condition. Fill all the cracks, honey-combs, voids etc, using cement mortar or our Kingbond repair compound. Let the surface dry completely and polish it with grinding leveling. Apply a coat of Kingcoat FP-200SF liberally by brush or roller over the surface. Allow the surface to be touch-dry. Mix the A and B parts of Kingcoat SLF-400SF thoroughly, to get a uniform consistency. Apply the Kingcoat SLF-400SF layer over this primer coat by a notched trowel and spiked roller. Allow the layer to cure for 24 hours, after which the treatment is suitable for foot traffic. Protect the treatment during the curing period from mechanical disturbances, water splashes, direct sunlight &heat. Full cure time is 7days from installation on the substrate. Application thickness can be form 1mm to 5mm depending upon functional requirements.
Application Areas
・ Light-duty Industrial manufacturing facilities, warehouses, airports
・ Light-corrosive chemical and pharmaceutical plants
・ Food processing and dairy plant flooring
・ Clean rooms, laboratories, show rooms, garages
・ Institutional facilities, schools, hospitals
・ Commercial traffic floors